Residential Accessory Buildings


Cabins:
1 Story Cabin
This is a small cabin designed for a level site in a wooded area.  It's pretty simple and should be relatively easy to build and inexpensive.  This was done in year 2000. 

To see the Floor Plan Click Here

Set includes 11 Sheets that include Architectural and Structural plans.  Plumbing, HVAC, Electrical, and T-24 or similar requirements are not included.

The original cost for these plans was about $1200.  You can purchase them for $400 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.

 		576 sf living space
1 bedroom
1 bath
2 Story Cabin
This is a small cabin designed for a level site in a wooded area.  It's fairly simple with a 2nd level loft used as an office with a separate entrance.  This was done in year 1997. 

To see the Floor Plan Click Here

Set includes 6 Sheets that include Architectural, Structural plans and Electrical Layouts.  Plumbing, HVAC, and T-24 or similar requirements are not included.

The original cost for these plans was about $1200.  You can purchase them for $400 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.		 576 sf Living Space
1 Bathroom

Recreation Rooms:
1 Story Recreation Room
This is an accessory building to the main house.  The owner wanted something simple to match the existing residence and serve as a recreation room, office and utility room. It was done for a relatively flat site in 1999.

To see the Floor Plan Click Here

Set includes 11 Sheets that include Architectural and Structural plans.  Plumbing, HVAC, Electrical, and T-24 or similar requirements are not included.

The original cost for these plans was about $2000.  You can purchase them for $500 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.

 960 sf living space
1 office
1 bath
1 recreation room
1 laundry room

Workshops & Garages:
1 Story Garage/Workshop
This is a good sized workshop or garage.  It was originally designed at the edge of a hill so it is on concrete drilled piers with wood framed floors.  The original owner cut and milled all his own lumber for this. This was done in year 1995. 

To see the Floor Plan and Elevations Click Here

Set includes 10 Sheets that include Architectural and Structural plans.  Plumbing, HVAC, Electrical, and T-24 or similar requirements are not included.

The original cost for these plans was about $5000.  You can purchase them for $800 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.

 		1280 sf space
1 Story Garage/Workshop
This is a workshop or garage.  It was originally designed at the edge of a hill so it is on concrete drilled piers with wood framed floors.  The original owner cut and milled all his own lumber for this. This was done in year 1995. 

To see the Floor Plan and Elevations Click Here

Set includes 10 Sheets that include Architectural and Structural plans.  Plumbing, HVAC, Electrical, and T-24 or similar requirements are not included.

The original cost for these plans was about $3000.  You can purchase them for $600 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.

 640 sf space
1 Story Garage/Workshop
This is a 2 car garage with a small studio or workshop.  It was designed for a wooded area. The original owner cut and milled all his own lumber for this. This was done in year 1997. 

To see the Floor Plan and Elevations Click Here

Set includes 11 Sheets that include Architectural and Structural plans.  Plumbing, HVAC, Electrical, and T-24 or similar requirements are not included.

The original cost for these plans was about $2000.  You can purchase them for $500 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.		 640 sf space
2 Story Garage/Studio
This is a 2 car garage on the lower level and a work studio on the upper floor.  It was designed for a wooded area in about 2001.  It's a fairly simple design with lots of open space, covered exterior stair and a balcony. 

To see the Floor Plan and Elevations Click Here

Set includes 14 Sheets that include Architectural and Structural plans.  Plumbing, HVAC, Electrical, and T-24 or similar requirements are not included.

The original cost for these plans was about $3000.  You can purchase them for $800 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.		 1568 sf space
2 Story Garage/Studio
This is a 2 story workshop and studio for a local artist.  It was done for a flat site and was actually an addition to the 1 story stroage space on the lower level.  You can have it without the lower storage space as that was existing.  This wad done in about 2004.

 To see the Floor Plan and Elevations Click Here

Set includes 18 Sheets that include Architectural, Structural plans and Electrical Layouts.  Plumbing and T-24 or similar requirements are not included.

The original cost for these plans was about $5000.  You can purchase them for $1,500 plus code updating costs, adjusting to your site conditions, any changes and printing & shipping costs.		 1050 sf 1st Floor Studio
1050 sf 2nd Floor Studio
1 1/2 Bathroom